Do's.

• Keep the VRLA batteries away from heat, sparks, fire etc.
• Clean the VRLA batteries as and when dust accumulates.
• Charge the VRLA batteries once in every six months @ 13.8V VPC for 24 hrs. If stored for longer periods
• Wherever cables are used ensure using proper cable size and crimping of the plug to the cable
• Torque all terminal bolts to 11 Nm (100 Lb.-inch)
• Re- torque the terminal bolts once in every six months
• After discharge, recharge the batteries when power restores
• Always use calibrated instruments for measurements

Dont's

•    Do not tamper with the safety valves
• Do not over-tighten the terminal bolts
• Do not allow any metal objects to fall across the battery terminals
• Do not mix VRLA batteries of different capacities or makes
• Do not mix ordinary conventional/low maintenance VRLA batteries with Amaron Quanta SMF Batteries
• Do not install physically damaged batteries
• Do not make any tap connections from the VRLA battery bank
• Do not boost charge the VRLA batteries for more than 12 Hrs. in regular operation / usage
• Do not allow any direct sunlight to fall on batteries